Frozen cooling pack Foam Brick -21Art.-Nr.:
The Foam Brick -21 frozen element is a safe alternative to dry ice. Dry ice is subject to strict regulations on hazardous materials. These can be neglected when using THERMOCON frozen elements. For you this means less effort and more safety.
The THERMOCON Foam Brick -21 consists of a dimensionally stable and leak-proof foam core and a robust PE/PA composite foil. This makes it suitable for multiple use. A reliable frozen element for the temperature range -15 to -25°C to guarantee the quality of your temperature-sensitive products.
Frozen cooling pack PCM -21Art.-Nr.:
The frozen pack PCM -21 melts at -21°C and is suitable as a replacement for dry ice when transporting temperature-sensitive goods. Dry ice is increasingly viewed critically, especially in air freight, and is classified as a hazardous material. Some service providers even reject the use of thermal packaging equipped with dry ice on principle. The frozen PCM pack is also much safer to handle than dry ice. Dry ice consists of frozen CO₂, which has a temperature of -78°C. Appropriate precautions must be taken when handling dry ice, otherwise there is a risk of burns. In addition, the PCM -21 can be reused as often as desired. This is another advantage over the disposable dry ice solution.
Dimensions: 280 x 190 x 26 mm
The PCM pack (PCM = Phase Change Material) opens up new possibilities for the temperature-controlled transport of pharmaceutical products, such as medicines or other temperature-sensitive goods in various temperature ranges. For example, strongly fluctuating outside temperatures can be absorbed and a falling below a certain temperature mark can be avoided.
The ambient temperature range (+15 to +25°C) is one of the typical temperature ranges for the storage and transportation of pharmaceuticals and medicines. For passive thermal packaging, temperature-controlled water-based refrigerants are often used to maintain these temperature limits. These may not be sufficient to maintain the permissible temperature range in hot and especially cold ambient temperatures. Special PCM packs with melting points at +18°C and +22°C can achieve that.
But the PCM pack can also show its strengths in the cold temperature range (+2 to +8°C). It reliably keeps the temperature range inside the Thermobox stable and thus prevents the temperature from falling below or exceeding a certain mark.
The THERMOCON PCM frozen pack melts at -21°C and thus covers the frozen temperatue range (<-15°C). It’s a good alternative to dry ice when transporting temperature-sensitive goods. Dry ice is increasingly critical, especially in air freight, and is classified as hazardous goods. Some service providers even generally reject the use of thermal packaging equipped with dry ice. The PCM frozen pack is also much safer to handle than dry ice. Dry ice consists of frozen CO₂, which has a temperature of -80°C. Appropriate precautions must be taken when handling dry ice, otherwise burns may result. In addition, the PCM frozen pack can be reused as often as required. This is a further advantage over the one-way solution dry ice.
The PCM packs from THERMOCON are one of the most powerful on the market.
Gel pack BASICArt.-Nr.:
The Gel pack Basic is our cheapest cooling element and was designed for single-use applications.
The gel pack is available in six different sizes, from 200 to 680 grams filling weight. The melting point is about 0°C and is therefore ideal for the thermal transportation of temperature-sensitive products.
The foil is suitable for direct food contact. Furthermore, the water-based cooling gel of is non-toxic and therefore easy to dispose with household waste.
HDPE proArt.-Nr.: 14002
The Schaumaplast HDPE pro pack has an extra thick HDPE case and is suitable as a multi-use element in passive thermal packaging. Conventional cooling elements tend to buckle in frozen state. The special construction of the Schaumaplast hard plastic pack minimizes this build-up of bumps and the pack expands at defined points during freezing. This allows the use in selected qualified thermoboxes, where the cooling elements must be placed in certain positions.
Gel pack PAPERArt.-Nr.:
The gel pack paper has a high-quality kraft paper that further enhances the value and naturalness of your product.
The paper also absorbs condensation.
The gel pack is available in six different sizes, from 200 to 500 grams filling weight. The melting point is about 0°C and is therefore ideal for the thermal transportation of temperature-sensitive products.
The foil is suitable for direct food contact. Furthermore, the water-based, viscous gel of all our gel packs is non-toxic and therefore easy to dispose with household waste.
Delivery time on request
- dimensionally stable
- robust PA/PE composite foil
- even heat absorption
- ideal for insertion into the pockets of our system boxes
Foam Brick with melting point at -21°C:
- safe alternative to dry ice
- no dangerous goods labelling necessary
- GDP compliant
- also suitable for direct product contact
- holds transported goods safely in the temperature range from -15°C to -21°C
- reusable – unlike dry ice
- own storage possible
The durable HDPE hard plastic cooling pack is an affordable solution for multiple use. The cover can be easily cleaned with warm water. This cooling element is water-based and has no performance loss when used multiple times.
Available in the quantities 200, 400 and 750 grams or super flat with a filling weight of 200g.
Gel pack PROArt.-Nr.:
Our professional “Gel pack PRO” can be reused several times thanks to its robust PA / PE composite foil.
The gel pack is also available in four different sizes, from 200 to 680 grams. The melting point is around 0°C, making it ideal for thermal transportation. In addition, the gel pack is also available with a melting point of about -21 ° C and a good alternative to dry ice. The safe handling and reusability of the frozen gel packs are not only practical but also cost effective.